Persian 
English 
Features
■Paint pressure-reducing valve is included as standard equipment
A paint pressure-reducing valve is included as standard equipment, so you can start painting by simply attaching a spray gun.
■Can also be used as a paint supply pump for cell type painting equipment
By combining with a back pressure valve, it can also be used for a mini paint circulation system.
specification
| format | type | pump type | Pump body wetted parts material | Pressure multiplier (hydraulic pressure: pneumatic pressure) | Air pressure reducing valve type | Air pressure usage range [MPa] | Discharge amount at 30 cycles/min [L/min] | Paint pressure reducing valve type | Pressure reducing valve body wetted parts material | Paint pressure adjustment range [MPa] | Maximum flow rate [L/min] | Paint viscosity used (reference value) | Operating temperature range [℃] | Air supply port | Paint outlet | paint inlet filter | paint intermediate filter | Optional paint intermediate filter | Optional paint agitator | Overall length x overall width x overall height [mm] | Mass [kg] | Required compressor (for pump operation) [kW] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PPS-102C | 1 piece specification | PP-7021B | aluminum/steel | 2.3:1 | RR-55B | 0～0.7 | 2.7 | Special PR₋51B | aluminum | 0～0.6 | 2.0 | 100 seconds/NK₋2 or less (300cP or less) | Below 60℃ | G1/4B male | G1/4B male | 50 mesh | 60 mesh | TF-71:100 mesh | AMM-711/AMM-611 | 380×360×695 | 13.6 | 0.4～0.75 |
