Purpose

・Automotive repair
・Automotive industry
・Metal painting
・Resin painting
・Woodwork painting
・Ironwork painting
・Architectural painting

specification 

formatold modelPump body wetted parts materialDischarge amount at 30 cycles/min [L/min]Maximum discharge rate [L/min]Air pressure usage range [MPa]Paint pressure reducing valve typePaint pressure reducing valve wetted parts materialPaint pressure reducing valve Paint pressure adjustment range [MPa]Paint pressure reducing valve maximum flow rate [L/min]Usable viscosity (recommended value) [mPa・s]Operating temperature range [℃]Air supply portPaint/fluid outletPaint/fluid inlet filterDischarge volume per cycle [mL/cycle]Optional paint intermediate filterOptional paint agitatorOptional 2-piece kitOverall length x overall width x overall height [mm]Mass [kg]Required compressor [kW]accessoriesremarksNoise value [dB]Operating ambient temperature [℃]Maximum working pressure [MPa]
DPS-70C -- aluminum 0.6 6.0 0.15～0.7 PR-5B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 TF-7: 100 mesh ⁻ PR₋5B-S1 173×393×663 Four 0.4～0.75 -- -- 66 5～40 0.7
DPS-70TC -- aluminum 0.6 6.0 0.15～0.7 Not included - - - 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male Not included 20 ⁻ ⁻ ⁻ 173×213×515 3 0.75～1.5 -- -- 66 5～40 0.7
DPS-704C -- aluminum 0.6 6.0 0.15～0.7 PR-5B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 TF-7: 100 mesh ⁻ PR-5B-S1 173×307×364 Four 0.4～0.75 -- -- 66 5～40 0.7
DPS-704CN -- stainless 0.6 6.0 0.15～0.7 PR-5BN stainless 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 - ⁻ PR-5BN-S1 173×307×364 Five 0.4～0.75 -- -- 66 5～40 0.7
DPS-70LC -- aluminum 0.6 6.0 0.15～0.7 PR-5B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 50 TF-7: 100 mesh AMM-721B PR-5B-S1 390×260×823 16 0.4～0.75 -- -- 66 5～40 0.7
DPS-70LCN -- stainless 0.6 6.0 0.15～0.7 Not included - - - 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 50 -- ⁻ PR-5B-S1 173×307×364 Five 0.4～0.75 -- -- 66 5～40 0.7
DPS-70LPC -- aluminum 0.6 6.0 0.15～0.7 PR-5B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 50 TF-7: 100 mesh AMM-721B PR-5B-S1 410×300×823 18 0.4～0.75 -- -- 66 5～40 0.7
DPS-70LPCN -- stainless 0.6 6.0 0.15～0.7 PR-5BN stainless 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 50 ⁻ AMM-721B PR-5BN-S1 410×300×823 19.0 0.4～0.75 -- -- 66 5～40 0.7
DPS-702C -- aluminum 0.6 6.0 0.15～0.7 PR-51B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 TF-7: 100 mesh AMM-721B PR-5B-S1 308×307×718 5.0 0.4～0.75 -- -- 66 5～40 0.7
DPS-702CN -- stainless 0.6 6.0 0.15～0.7 PR-51BN stainless 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 ⁻ AMM-721B PR-5BN-S1 308×307×718 6.0 0.4～0.75 -- -- 66 5～40 0.7
HDP-705C -- aluminum 0.6 6.0 0.15～0.7 PR₋5B aluminum 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 TF-7:100 mesh AMM-721B PR₋5B-S1 410×226×446 8.0 0.4～0.75 -- -- 66 5～40 0.7
HDP-705CN -- stainless 0.6 6.0 0.15～0.7 PR₋5BN stainless 0～0.6 2.0 190 or less (60 seconds/NK-2 or less) 5～40 G1/4B male G1/4B male 50 20 ⁻ AMM-721B PR₋5BN-S1 410×226×446 9.0 0.4～0.75 -- -- 66 5～40 0.7